Monday, December 29, 2014

Raspberry Mojito Recipe

We’ve made it to the end of 2014 and I feel that a drink is in order. Mojitos are one of my favorite drinks right now because I love mint.  Mojitos are lower in calories than many other drinks so drink up ladies.

This recipe is actually something my boyfriend put together and he is the lovely model in the pictures.

-Bacardi Razz
-Tonic or club soda
-1 lime sliced

Start by taking 6-8 fresh mint leaves and a slice of lime and muddling them at the bottom of your serving glass.  I used a wooden spoon to do this.

Add 2 more slices of lime into the glass along with a teaspoon of sugar and muddle it all again.

Add a shot of Bacardi Razz or more to the glass, if desired.  

Add ice and tonic water (or club soda) to glass and stir.  

Place a mint leave at top of glass and serve.  Cheers!

Spice it up and drink up,

Monday, December 22, 2014

Snow Sign Tutorial

The weather outside is frightful and the fire is so delightful but as long as you love me so, let it snow, let it snow, let it snow.  

Here in Texas the weather is in the 50’s and I don’t see snow is in our near future. I’m originally from Chicago and I was not a fan of the harsh winters but it would be nice to have snow on Christmas. So let’s make some SNOW -letters that is. This is a really fun project and the concept can be used for other projects as well. If you have not had a chance to use mod podge it will change your life.  Plus, there are several DIY mod podge receipes on Pinterest. 

Want to make this?  Here is what you need: 
1. Letters S-N-O-W (I got mine from Michaels) 
2. 4 pgs of scrap book paper of your choosing (I got mine from hobby lobby) 
3. Glue or mod podge 
4. Scissors 

I wanted my letters to have a vintage feel so I picked scrapbook paper to reflect this.  I used wooden letter that were about 10 inches in height. 

Place the letters facing down and closely trace the letters. (tip: hold the pencil with the tip inward so that the outline is more accurate).  

Cut the outline(s) out. Test the paper over the letter to review for errors. 

With glue or mod podge secure the paper to the letters.

Allow to dry. After 24hrs of dry time the letters are ready to display.  

Make it Spicy and Merry,

Like this project? You may also like DIY Mini Trees.
Featured on:
Judy's Handmade Creations

Monday, December 15, 2014

DIY Decorative Trees

Christmas is only 10 days away…Can you believe it? I'm excited to spend next week with family and friends.  

What would Christmas be without a Christmas tree? Did you know the tradition of the Christmas tree dates back to the 15th or 16th century when devout Christians would bring trees into their homes. During that time period trees would be decorated with fruits, nuts, and other edible treats. Tree decorating today has gotten even more creative and beautiful.  I’ve seen some pretty amazing trees on pintrest as well as in stores and homes.

I recently made some DIY trees using leftover supplies I had from other projects.  I wish I would've taken more pictures because I love the outcome. I didn't know how this project would turn out since I was acting on a whim, otherwise I would have step-by-step photos. I guess my lack of confidence in this project got the best of me.  Here are the "after" pictures and I’ll give you a little synopsis of how they were created.

The Burlap Scrap Tree

For this tree, I cuts pieces of burlap about 3/4 to 1 inch wide by 6 inches long. Note these are estimated measurements and it does not need to be exact. I used four different types of burlap and a styro foam cone that was 10 inches tall. I started from the bottom of the cone and glued strips vertically to the cone. 

The glue was only applied to the top of the burlap scraps to give movement to the bottom. I worked by gluing the pieces to bottom, the middle, and then the top. To finish the project off I glued an ornament on top. 

 Dressed in Burlap tree 

I cut several different lengths of burlap and glued them (with a glue gun) around the 10 inch cone.  I wanted the burlap pieces to go around the cone so I cut the pieces longer to insure they would go all the way around without a gap. 

Twine Wrapped Tree 

To create this tree I wrapped the twine starting from the bottom all the way up to the top occasionally glueing as I went along. I wrapped the cone with a white string and glued a star to the top. 

Hope you have a spicy and magical holiday,

Wednesday, December 10, 2014

Christmas Tree, My Christmas Tree

Monday, December 8, 2014

5 Minute Nutcracker Wreath

Christmas is just around the corner I can’t believe it!  This year I de-cluttered some of my older Christmas decorations to make room for new decorations and crafts.  My Thanksgiving break consisted mainly that along with Christmas shopping.  I love nutcrackers and continue to decorate my mantel with them every year.  While I was at the dollar store this week, I found some mini nutcrackers and thought a frame wreath would be a great way to showcase them. 

-Frame 8 x 10 or larger
-2 small 4-6 inch nutcrackers
-Holiday ribbon
-Twine or wire for hanging
-glue gun

First step is to separate the frame from the backing and the glass.  I tightly wrapped the frame with burlap.  Try to make it as tight as possible. Once the frame is completely wrapped I secured burlap flap to the frame with glue.

The next step is to glue the nutcrackers to the burlap. 

I placed glue on the handle and the base of the nutcracker to make sure it was secure. Hold the nutcracker in place for about 2 minutes each.

I created a bow at the top using festive holiday ribbon and secured it to the frame with glue.  I tied twine to the top of the frame to secure it to the wall.  Now doesn’t that look festive!

 I love how this turned out and it as not time consuming at all.  

Make it Spicy,